Tanks and pressure vesselsFGR-TPV-002
Compressed air receiver, 1,000 L
A vertical carbon steel pressure vessel that stores compressed air between the compressor and the distribution network.
- Volume:
- 1,000 L
- Working pressure:
- 0.8 MPa (8 bar)
117 products across 10 categories
Industrial equipment catalogue
Industrial equipment from our OEM and manufacturer network, quoted against your specification. Each product shows its specification and manufacturer reference, confirmed with the OEM before you commit. Need something not listed? Ask us for it.
59 items for Mining and minerals
- Tanks and pressure vessels
Tanks and pressure vesselsFGR-TPV-003
Liquid oxygen (LOX) storage tank, 1,000 to 100,000 kg
Vacuum-insulated cryogenic tanks for storing liquid oxygen on site, from 1,000 kg micro-bulk tanks to bulk tanks holding up to 100,000 kg, supplied by FGR Online.
- Micro-bulk tank, 1 m³:
- Up to 1,083 kg LO2
- Micro-bulk dimensions:
- 2085 × 1580 × 1160 mm
Pumps, valves and hydraulicsFGR-PVH-002
Horizontal centrifugal slurry pump
A heavy-duty, cantilevered horizontal centrifugal pump with replaceable wear-resistant liners for pumping abrasive mineral slurries.
- Flow (AM series range):
- 13-5000 m³/h
- Head (AM series range):
- 5-68 m
Pumps, valves and hydraulicsFGR-PVH-003
Flanged floating ball valve
A quarter-turn, straight-through floating ball valve with ANSI flanged ends, offered in carbon steel or stainless steel bodies.
- Size range:
- 1/2" to 12"
- Pressure rating:
- 150LB / 300LB / 600LB
Pumps, valves and hydraulicsFGR-PVH-004
Hydraulic power unit
A packaged hydraulic supply consisting of an electric motor, pump, oil tank and control valves that delivers pressurised oil to cylinders and hydraulic motors.
- Voltage:
- 380V
- Motor power:
- 2.2 kW
Material handling and liftingFGR-MHL-001
Electric chain hoist, 2 t
A motor-driven hoist that lifts loads with a load chain and hook, typically suspended from a hook, trolley or crane beam.
- Rated capacity:
- 2 t
- Lifting speed:
- 2~8 m/min (6.6 m/min also listed)
Material handling and liftingFGR-MHL-002
Troughed belt conveyor
A continuous rubber-belt conveyor carried on troughing idlers that transports bulk materials such as coal, ore, stone and grain.
- Belt width options:
- 500, 650, 800, 1000, 1200, 1400 mm
- Length options:
- 15, 30, 45, 60, 100, 150, 200, 300 m
Material handling and liftingFGR-MHL-004
Single-girder overhead crane
An electric overhead travelling crane with a single main girder spanning the bay, running on end carriages along rails and fitted with an electric hoist.
- Capacity range:
- 1, 2, 3, 5, 10, 16, 20 t
- Span:
- 7.5-31.5 m
Process and manufacturing machineryFGR-MFG-002
Horizontal decanter centrifuge
A continuous horizontal scroll centrifuge that separates suspended solids from liquid using high centrifugal force.
- Drum (bowl) diameter:
- 450 mm
- Drum length:
- 2000 mm
Process and manufacturing machineryFGR-MFG-004
Electronic universal testing machine
A computer-controlled load frame that applies tensile, compressive or bending forces to test specimens and records force against displacement.
- Max. testing force:
- 100 kN (series: 10/20/30/50/100 kN)
- Measuring range of testing force:
- 2%-100% FS
Motors, power and airFGR-MPA-001
IE3 three-phase induction motor
A totally enclosed, fan-cooled three-phase asynchronous motor built to IEC frame sizes and meeting the IE3 premium-efficiency class.
- Rated power (YE3-100L-2):
- 3 kW
- Speed:
- 2900 r/min (2-pole, 50 Hz)
Motors, power and airFGR-MPA-002
Low-voltage variable frequency drive
An electronic AC drive that varies the frequency and voltage supplied to an induction motor to control its speed and torque.
- Rated power:
- 7.5 kW
- Output frequency:
- 0~1200 Hz (V/F); 0~600 Hz (FVC)
Motors, power and airFGR-MPA-003
Silent diesel generator set
A diesel engine coupled to an alternator on a common base, housed in a sound-attenuated canopy, for prime or standby electrical power.
- Prime power:
- 200 kVA / 160 kW
- Standby power:
- 220 kVA / 176 kW
Motors, power and airFGR-MPA-004
Rotary screw air compressor
An electrically driven, oil-lubricated compressor that produces continuous compressed air using a pair of meshing helical rotors.
- Motor power:
- 37 kW (50 HP)
- Working pressure:
- 8 bar
Motors, power and airFGR-MPA-005
Industrial axial fan
A motor-driven fan that moves large volumes of air parallel to its shaft at low pressure for general and industrial ventilation.
- Impeller size (9G-4):
- 900 mm / 36"
- Voltage (9G-4):
- 380 V
Electrical and instrumentationFGR-EIC-001
Low-voltage switchgear and motor control centre
Floor-standing low-voltage withdrawable switchgear assembly that combines power distribution (PC) and motor control centre (MCC) cubicles for AC 50 Hz plant distribution systems.
- Model:
- GCK
- Voltage level:
- Low voltage, AC
Electrical and instrumentationFGR-EIC-002
Electromagnetic flow meter
Full-bore electromagnetic flow meter for conductive liquids in closed pipelines, with 4-20 mA, pulse and RS485 outputs.
- Model:
- WFD
- Nominal diameter:
- DN15 to DN800
Electrical and instrumentationFGR-EIC-003
Pressure transmitter, 4 to 20 mA
Two-wire 4-20 mA silicon-sensor pressure transmitter with SS316L wetted diaphragm, LCD display and 1/2" NPT or M20x1.5 process connection.
- Model:
- AT2088
- Pressure range:
- 0-200 MPa
Tools, hardware and PPEFGR-TPE-001
Corded angle grinder, 230 mm
A corded 230 mm angle grinder for heavy cutting and grinding of metal and masonry. The reference model is rated at 2,200 W.
- Model:
- GA9020
- Continuous input power:
- 2200 W
Tools, hardware and PPEFGR-TPE-002
Magnetic core drilling machine
1500 W magnetic-base drilling machine for annular cutters up to 60 mm diameter and 75 mm depth, with MT3 tool holder.
- Model:
- DX-60
- Input power:
- 1500 W
Tools, hardware and PPEFGR-TPE-003
Industrial safety helmet
An industrial safety helmet with a polyethylene shell and adjustable harness for head protection on sites and in plants. The reference model is stated by its manufacturer to meet EN 397 and EN 50365.
- Product code:
- AJE030-000-100
- Shell material:
- HDPE
HVAC and refrigerationFGR-HVR-004
Counter-flow open cooling tower, 300 m³/h
A square, induced-draft, open-circuit cooling tower in which air rises against falling water through PVC fill to cool condenser or process water by evaporation.
- Model:
- NSH-300
- Nominal flow:
- 300 m³/h
HVAC and refrigerationFGR-HVR-005
Closed-circuit cooling tower (cross-flow), 15-335 RT
An evaporative fluid cooler in which process fluid flows inside a sealed coil while spray water and air cool the coil, keeping the process circuit clean.
- Series:
- KCH (cross-flow)
- Capacity range:
- 15RT-335RT
Process and manufacturing machineryFGR-MFG-007
Manual Rockwell hardness tester
A bench-top instrument that measures the Rockwell hardness of metals by pressing an indenter into the test piece under set loads.
- Model:
- HR-150A
- Measuring range:
- 20-88 HRA, 20-100 HRB, 20-70 HRC
Process and manufacturing machineryFGR-MFG-008
Horizontal ball mill 900 × 3000
A rotating steel cylinder partly filled with grinding balls that reduces crushed ore or minerals to fine powder or slurry.
- Model:
- 900 × 3000
- Cylinder rotating speed:
- 36 r/min
Process and manufacturing machineryFGR-MFG-009
Jaw crusher PE250 × 400
A primary crusher that breaks rock and ore between a fixed jaw and a moving jaw driven by an eccentric shaft.
- Model:
- PE250 × 400
- Feed opening:
- 250 × 400 mm
Process and manufacturing machineryFGR-MFG-010
Round vibrating sieve (vibro screen)
A circular screening machine driven by a vertical vibration motor that grades, de-dusts or removes oversize from powders, granules and slurries.
- Machine diameter range:
- From 400 mm to 2000 mm
- Effective screening diameter:
- 360 mm (BZ400) to 1730 mm (BZ1800)
Process and manufacturing machineryFGR-MFG-011
CNC flat-bed lathe CK6140
A computer-controlled horizontal turning lathe on a flat cast bed for producing shafts, bushes, threads and other round parts.
- Model:
- CK6140
- Swing over bed:
- Ø420 mm
Tanks and pressure vesselsFGR-TPV-004
Double-wall fuel storage tank, 1 to 100,000 m³
A horizontal double-wall fuel tank with a steel inner shell and fibreglass outer wall, used to store diesel and petrol with secondary containment.
- Capacity range:
- 1 m³ to 100,000 m³ (on enquiry)
- Capacity:
- 50000 liters
Tanks and pressure vesselsFGR-TPV-009
GRP sectional panel water storage tank, 1 to 100,000 m³
A rectangular water tank assembled on site from bolted glass-reinforced plastic (SMC) panels, sized from 1 m³ to 1000 m³.
- Capacity range:
- 1 m³ to 100,000 m³ (on enquiry)
- Standard model range:
- 1 m³ to 1000 m³
Tanks and pressure vesselsFGR-TPV-011
PE-lined steel chemical storage tank, 1 to 100,000 m³
A carbon-steel tank with a thick polyethylene lining for storing corrosive liquids such as hydrochloric acid and sodium hypochlorite.
- Capacity range:
- 1 m³ to 100,000 m³ (on enquiry)
- Capacity:
- 10 m³
Tools, hardware and PPEFGR-TPE-004
Inverter MIG/MMA welding machine 350 A
An IGBT inverter welding power source for gas-shielded wire (MIG/MAG) and manual metal arc (stick) welding of steel.
- Input power source:
- 220V ±10% 50/60Hz
- Phase:
- Single phase
Tools, hardware and PPEFGR-TPE-005
Inverter air plasma cutter 60 A
A three-phase DC inverter plasma cutting machine that uses compressed air to cut steel, stainless steel and non-ferrous metals.
- Input voltage:
- AC380V (±15%), three-phase, 50/60Hz
- Rated input power:
- 7.9 kVA
Tools, hardware and PPEFGR-TPE-006
Cordless brushless impact wrench 1/2"
A battery-powered impact wrench with a brushless motor and 1/2-inch square drive for fastening and loosening nuts and bolts.
- Maximum torque:
- 900 N.m
- Battery voltage:
- 18V
Tools, hardware and PPEFGR-TPE-007
SDS-plus rotary hammer drill 26 mm, 800 W
A corded electro-pneumatic rotary hammer with SDS-plus chuck for drilling and light chiselling in concrete and masonry.
- Model:
- Light Rotary Hammer -2657
- Voltage:
- 220-240V
Tools, hardware and PPEFGR-TPE-008
Half-face reusable respirator
A reusable silicone half-face mask that takes replaceable gas/vapour cartridges and particulate filters to protect the wearer's respiratory tract.
- Model:
- HM7500
- Shape:
- Half face
Tools, hardware and PPEFGR-TPE-009
Full-body safety harness (fall arrest)
A polyester-webbing full-body harness with back and waist D-rings for fall arrest at height.
- Material:
- Polyester
- Webbing:
- 45mm polyester webbing
Tools, hardware and PPEFGR-TPE-010
Auto-darkening welding helmet
A welding helmet with an electronic filter that darkens automatically when an arc is struck, protecting the eyes and face during welding and cutting.
- Filter size:
- 110 × 90 × 9 mm
- Viewing area:
- 92 × 42 mm
Tools, hardware and PPEFGR-TPE-011
Steel-toe leather safety boots (S3)
Leather safety boots with a steel toe cap and steel midsole plate for impact, compression and puncture protection on industrial sites.
- Model:
- PSLB305A
- Upper material:
- Leather
Electrical and instrumentationFGR-EIC-004
Oil-immersed distribution transformer 500 kVA, 11/0.4 kV
A three-phase, oil-filled transformer that steps medium-voltage supply down to 400 V for distribution to a site.
- Rated capacity:
- 500 kVA
- Voltage (HV / LV):
- 11 kV / 0.4 kV
Electrical and instrumentationFGR-EIC-007
80 GHz radar level transmitter
A non-contact level instrument that measures the distance to a liquid or solid surface using frequency-modulated radar and outputs a level signal.
- Frequency:
- 76-81 GHz (FMCW)
- Measuring range:
- Up to 120 m
Electrical and instrumentationFGR-EIC-009
Fixed gas detector, 4-20 mA
A permanently mounted gas sensor that continuously monitors for combustible or toxic gas and sends a 4-20 mA signal to a controller or PLC.
- Model:
- MT003
- Detectable gases:
- Combustible gas, CO, H2S, O2
Electrical and instrumentationFGR-EIC-011
Automatic power factor correction capacitor bank
A low-voltage cabinet of switched capacitor steps, controlled by a power factor regulator, that offsets inductive reactive power on a site's supply.
- Model:
- GGJ
- Rated capacity:
- 600 kvar (2 cabinets)
Material handling and liftingFGR-MHL-007
Wire rope electric hoist, 5 t
A motor-driven hoist that winds a steel wire rope on a drum to lift loads, usually running on a trolley along an I-beam or crane girder.
- Model:
- CD1 (single speed)
- Rated capacity:
- 5 t
Material handling and liftingFGR-MHL-008
Pillar-mounted slewing jib crane, 5 t
A free-standing column with a rotating horizontal arm carrying a hoist, giving lifting coverage over a circular work area.
- Model:
- BZ5t-5m
- Rated capacity:
- 5000 kg
Material handling and liftingFGR-MHL-010
U-trough screw conveyor
A rotating helical screw inside a covered U-shaped trough that moves powders, granules and small bulk solids along horizontal or inclined runs.
- Model series:
- LS
- Screw diameter:
- 200/250/315/400/500/630/800/1000 mm
Material handling and liftingFGR-MHL-011
Belt bucket elevator
A vertical conveyor in which buckets fixed to a continuous belt scoop bulk material at the boot and discharge it at the head.
- Model:
- TD250 (belt type)
- Bucket width:
- 250 mm
Motors, power and airFGR-MPA-006
Helical in-line gear reducer (gearmotor)
A coaxial helical gear reducer, usually supplied with a flanged electric motor, that reduces motor speed and increases output torque for driven machinery.
- Series / sizes:
- R series, sizes 17#-167#
- Layout:
- Coaxial, helical gear
Motors, power and airFGR-MPA-007
Motor soft starter 185 kW
An electronic starter that ramps the voltage to a three-phase induction motor to limit inrush current and mechanical shock during starting and stopping.
- Rated power:
- 185 kW
- Voltage:
- 220V/380V/660V...
Motors, power and airFGR-MPA-008
Permanent-magnet synchronous motor 11 kW
A three-phase AC motor with permanent magnets in the rotor, run from a variable frequency drive for high efficiency across a wide speed range.
- Rated output power:
- 11 kW
- Rated speed:
- 3000 r/min
- Motors, power and air
FGR-MPA-009
Flameproof (Ex d) induction motor 15 kW
A three-phase squirrel-cage motor in a flameproof enclosure for use where flammable gas or vapour may be present.
- Model:
- YBX3-160L-4
- Explosion protection (from listing title):
- Exdb II CT4
Motors, power and airFGR-MPA-013
Diesel mobile light tower 4 x 1000 W
A trailer-mounted lighting tower with a telescopic mast, floodlights and an on-board diesel generator for lighting work areas at night.
- Lights:
- 4 x 1000W metal halide floodlights
- Light capacity:
- 4 x 110000 lumen (total)
Pumps, valves and hydraulicsFGR-PVH-005
Submersible borehole pump, 4 inch
A multistage centrifugal pump and sealed motor that sit down a drilled borehole to lift groundwater to the surface.
- Model:
- 4SDM2/24
- Motor power (from listing title):
- 1.75 HP
Pumps, valves and hydraulicsFGR-PVH-007
Air-operated double-diaphragm pump, 2 inch
A compressed-air driven positive displacement pump that moves liquids, slurries and viscous or shear-sensitive fluids with two reciprocating diaphragms.
- Model:
- RD 50
- Fluid inlet and outlet size:
- 2 in.
Pumps, valves and hydraulicsFGR-PVH-008
Progressive cavity (single screw) pump
A positive displacement pump in which a helical rotor turning inside an elastomer stator moves sealed cavities of liquid from suction to discharge with low pulsation.
- Capacity range:
- 1-166 m3/h
- Pressure (single-stage models):
- 0.6 MPa (60 m head)
Pumps, valves and hydraulicsFGR-PVH-009
Submersible non-clog sewage pump
A close-coupled pump and sealed motor that sits submerged in a sump or wet well to pump sewage, drainage and dirty water containing solids and fibres.
- Model series:
- WQ
- Capacity range (series):
- 2-1500 m3/h
Pumps, valves and hydraulicsFGR-PVH-010
Rubber-seated butterfly valve, PN10/16
A quarter-turn valve with a disc rotating on a central stem inside a rubber-lined body, used to isolate or throttle water and general process lines.
- Model:
- D71X-16C
- Size range:
- DN40-DN3000
Pumps, valves and hydraulicsFGR-PVH-011
Double-acting tie-rod hydraulic cylinder
A linear actuator in which hydraulic oil pressure drives a piston and rod in both directions, with end caps held together by external tie rods.
- Model:
- SLG63/28-300-MF1
- Mounting:
- Front flange
Pumps, valves and hydraulicsFGR-PVH-012
Cast steel swing check valve
A non-return valve whose hinged disc swings open with forward flow and closes against its seat to stop reverse flow.
- Type:
- Swing check, bolted cover, metal seat
- Size range:
- 2 in. to 36 in.
Have a specification? Send it.
Datasheets, drawings, nameplate photos or a list of part numbers are all useful. Attach them to a quote request, or send them to us on WhatsApp.