Industry

Healthcare and hospitals

Hospitals and clinics rely on plant-room equipment that must keep running: standby power, water supply, cooling and, in many facilities, bulk oxygen storage. Equipment in clinical use falls under separate medical-device rules; this page covers building and utility equipment.

Request a quote Browse equipment for this sector

Hospital operating theatre with surgical lights, an operating table and medical equipment

Typical equipment needs

Standby power
Diesel generator sets and battery energy storage.
Motors, power and air
Gas and water storage
Liquid oxygen storage vessels, water storage tanks and pressure tanks.
Tanks and pressure vessels
Cooling and air handling
Chillers, air-conditioning units, cold rooms and dehumidifiers.
HVAC and refrigeration
Water and pumping
Booster pumps, borehole pumps and valves for water supply.
Pumps, valves and hydraulics

Buying considerations

Continuity of supply: State which loads are critical and how long standby equipment must run, so generators, transfer switches and storage are sized correctly.
Medical gas rules: Medical oxygen supply systems are regulated separately from industrial gas. Confirm the standards and approvals your facility requires before ordering.
Noise and space: Plant rooms are often close to wards. Give noise limits and available space for generators, chillers and pumps.

Include in your request

Critical loads and runtime required
Standards and approvals required
Plant-room space and noise limits

Start a quote request

Catalogue items for this sector

View all 11 in the catalogue

Tanks and pressure vessels
FGR-TPV-003
Liquid oxygen (LOX) storage tank, 1,000 to 100,000 kg
Vacuum-insulated cryogenic tanks for storing liquid oxygen on site, from 1,000 kg micro-bulk tanks to bulk tanks holding up to 100,000 kg, supplied by FGR Online.
Micro-bulk tank, 1 m³:
Up to 1,083 kg LO2
Micro-bulk dimensions:
2085 × 1580 × 1160 mm
DetailsRequest a quote for Liquid oxygen (LOX) storage tank, 1,000 to 100,000 kg
HVAC and refrigeration
FGR-HVR-002
Water-cooled screw chiller, 150-1,692 kW range
A packaged chiller using semi-hermetic screw compressors and shell-and-tube heat exchangers, rejecting heat to a condenser water circuit served by a cooling tower.
Model series:
HWWL (HWWL150 to HWWL1700D)
Cooling capacity:
150-1692 kW
DetailsRequest a quote for Water-cooled screw chiller, 150-1,692 kW range
HVAC and refrigeration
FGR-HVR-006
Walk-in cold room, PU sandwich panel
A modular insulated room built from cam-locked polyurethane sandwich panels, fitted with a door, unit cooler and condensing unit for chilled or frozen storage.
Temperature range:
-35~+15 ℃
Wall panel:
PU panel (40~42 kg/m³) with cam-lock
DetailsRequest a quote for Walk-in cold room, PU sandwich panel
HVAC and refrigeration
FGR-HVR-010
Direct-expansion combined air handling unit
A modular sectional air handling unit with a direct-expansion cooling coil, filtration, heating and optional humidification, served by a matched outdoor condensing unit.
Cooling capacity range:
12.1 kW-360 kW
Heating capacity range:
12.6 kW-378 kW
DetailsRequest a quote for Direct-expansion combined air handling unit
Tanks and pressure vessels
FGR-TPV-008
Steam accumulator
A horizontal carbon-steel pressure vessel that stores energy as pressurised hot water and releases steam to cover peaks in demand.
Volume:
1000 L ~ 100000 L
Rated pressure:
0.6 MPa ~ 1.25 MPa
DetailsRequest a quote for Steam accumulator
Tanks and pressure vessels
FGR-TPV-009
GRP sectional panel water storage tank, 1 to 100,000 m³
A rectangular water tank assembled on site from bolted glass-reinforced plastic (SMC) panels, sized from 1 m³ to 1000 m³.
Capacity range:
1 m³ to 100,000 m³ (on enquiry)
Standard model range:
1 m³ to 1000 m³
DetailsRequest a quote for GRP sectional panel water storage tank, 1 to 100,000 m³