Tanks and pressure vesselsFGR-TPV-002
Compressed air receiver, 1,000 L
A vertical carbon steel pressure vessel that stores compressed air between the compressor and the distribution network.
- Volume:
- 1,000 L
- Working pressure:
- 0.8 MPa (8 bar)
117 products across 10 categories
Industrial equipment catalogue
Industrial equipment from our OEM and manufacturer network, quoted against your specification. Each product shows its specification and manufacturer reference, confirmed with the OEM before you commit. Need something not listed? Ask us for it.
42 items for Oil, gas and energy
- Tanks and pressure vessels
Tanks and pressure vesselsFGR-TPV-003
Liquid oxygen (LOX) storage tank, 1,000 to 100,000 kg
Vacuum-insulated cryogenic tanks for storing liquid oxygen on site, from 1,000 kg micro-bulk tanks to bulk tanks holding up to 100,000 kg, supplied by FGR Online.
- Micro-bulk tank, 1 m³:
- Up to 1,083 kg LO2
- Micro-bulk dimensions:
- 2085 × 1580 × 1160 mm
Pumps, valves and hydraulicsFGR-PVH-002
Horizontal centrifugal slurry pump
A heavy-duty, cantilevered horizontal centrifugal pump with replaceable wear-resistant liners for pumping abrasive mineral slurries.
- Flow (AM series range):
- 13-5000 m³/h
- Head (AM series range):
- 5-68 m
Pumps, valves and hydraulicsFGR-PVH-003
Flanged floating ball valve
A quarter-turn, straight-through floating ball valve with ANSI flanged ends, offered in carbon steel or stainless steel bodies.
- Size range:
- 1/2" to 12"
- Pressure rating:
- 150LB / 300LB / 600LB
Pumps, valves and hydraulicsFGR-PVH-004
Hydraulic power unit
A packaged hydraulic supply consisting of an electric motor, pump, oil tank and control valves that delivers pressurised oil to cylinders and hydraulic motors.
- Voltage:
- 380V
- Motor power:
- 2.2 kW
Material handling and liftingFGR-MHL-001
Electric chain hoist, 2 t
A motor-driven hoist that lifts loads with a load chain and hook, typically suspended from a hook, trolley or crane beam.
- Rated capacity:
- 2 t
- Lifting speed:
- 2~8 m/min (6.6 m/min also listed)
Material handling and liftingFGR-MHL-002
Troughed belt conveyor
A continuous rubber-belt conveyor carried on troughing idlers that transports bulk materials such as coal, ore, stone and grain.
- Belt width options:
- 500, 650, 800, 1000, 1200, 1400 mm
- Length options:
- 15, 30, 45, 60, 100, 150, 200, 300 m
Material handling and liftingFGR-MHL-004
Single-girder overhead crane
An electric overhead travelling crane with a single main girder spanning the bay, running on end carriages along rails and fitted with an electric hoist.
- Capacity range:
- 1, 2, 3, 5, 10, 16, 20 t
- Span:
- 7.5-31.5 m
Process and manufacturing machineryFGR-MFG-002
Horizontal decanter centrifuge
A continuous horizontal scroll centrifuge that separates suspended solids from liquid using high centrifugal force.
- Drum (bowl) diameter:
- 450 mm
- Drum length:
- 2000 mm
Motors, power and airFGR-MPA-003
Silent diesel generator set
A diesel engine coupled to an alternator on a common base, housed in a sound-attenuated canopy, for prime or standby electrical power.
- Prime power:
- 200 kVA / 160 kW
- Standby power:
- 220 kVA / 176 kW
Electrical and instrumentationFGR-EIC-001
Low-voltage switchgear and motor control centre
Floor-standing low-voltage withdrawable switchgear assembly that combines power distribution (PC) and motor control centre (MCC) cubicles for AC 50 Hz plant distribution systems.
- Model:
- GCK
- Voltage level:
- Low voltage, AC
Electrical and instrumentationFGR-EIC-003
Pressure transmitter, 4 to 20 mA
Two-wire 4-20 mA silicon-sensor pressure transmitter with SS316L wetted diaphragm, LCD display and 1/2" NPT or M20x1.5 process connection.
- Model:
- AT2088
- Pressure range:
- 0-200 MPa
Tools, hardware and PPEFGR-TPE-001
Corded angle grinder, 230 mm
A corded 230 mm angle grinder for heavy cutting and grinding of metal and masonry. The reference model is rated at 2,200 W.
- Model:
- GA9020
- Continuous input power:
- 2200 W
Tools, hardware and PPEFGR-TPE-002
Magnetic core drilling machine
1500 W magnetic-base drilling machine for annular cutters up to 60 mm diameter and 75 mm depth, with MT3 tool holder.
- Model:
- DX-60
- Input power:
- 1500 W
Tools, hardware and PPEFGR-TPE-003
Industrial safety helmet
An industrial safety helmet with a polyethylene shell and adjustable harness for head protection on sites and in plants. The reference model is stated by its manufacturer to meet EN 397 and EN 50365.
- Product code:
- AJE030-000-100
- Shell material:
- HDPE
HVAC and refrigerationFGR-HVR-004
Counter-flow open cooling tower, 300 m³/h
A square, induced-draft, open-circuit cooling tower in which air rises against falling water through PVC fill to cool condenser or process water by evaporation.
- Model:
- NSH-300
- Nominal flow:
- 300 m³/h
HVAC and refrigerationFGR-HVR-005
Closed-circuit cooling tower (cross-flow), 15-335 RT
An evaporative fluid cooler in which process fluid flows inside a sealed coil while spray water and air cool the coil, keeping the process circuit clean.
- Series:
- KCH (cross-flow)
- Capacity range:
- 15RT-335RT
Process and manufacturing machineryFGR-MFG-006
Disc stack separator centrifuge
A vertical high-speed centrifuge that uses a stack of conical discs to clarify liquids or separate two liquids and fine solids continuously.
- Models (two-phase):
- RSLD-40, RSLD-90, RSLD-125, RSLD-225
- Models (three-phase):
- RSSD-40, RSSD-90, RSSD-125, RSSD-225
Process and manufacturing machineryFGR-MFG-007
Manual Rockwell hardness tester
A bench-top instrument that measures the Rockwell hardness of metals by pressing an indenter into the test piece under set loads.
- Model:
- HR-150A
- Measuring range:
- 20-88 HRA, 20-100 HRB, 20-70 HRC
Process and manufacturing machineryFGR-MFG-011
CNC flat-bed lathe CK6140
A computer-controlled horizontal turning lathe on a flat cast bed for producing shafts, bushes, threads and other round parts.
- Model:
- CK6140
- Swing over bed:
- Ø420 mm
Tanks and pressure vesselsFGR-TPV-004
Double-wall fuel storage tank, 1 to 100,000 m³
A horizontal double-wall fuel tank with a steel inner shell and fibreglass outer wall, used to store diesel and petrol with secondary containment.
- Capacity range:
- 1 m³ to 100,000 m³ (on enquiry)
- Capacity:
- 50000 liters
Tanks and pressure vesselsFGR-TPV-005
LPG storage tank, 1 to 100,000 m³
A horizontal carbon-steel pressure vessel (bullet tank) for bulk storage of liquefied petroleum gas.
- Capacity range:
- 1 m³ to 100,000 m³ (on enquiry)
- Volume:
- 50 m³
Tanks and pressure vesselsFGR-TPV-010
ISO tank container, 20 ft T11, 25,000 L
A stainless steel tank in a 20 ft ISO frame for storing and transporting bulk liquids by road, rail and sea.
- Type:
- Tank container, 20'
- Volume:
- 25,000 litres
Tools, hardware and PPEFGR-TPE-009
Full-body safety harness (fall arrest)
A polyester-webbing full-body harness with back and waist D-rings for fall arrest at height.
- Material:
- Polyester
- Webbing:
- 45mm polyester webbing
Tools, hardware and PPEFGR-TPE-011
Steel-toe leather safety boots (S3)
Leather safety boots with a steel toe cap and steel midsole plate for impact, compression and puncture protection on industrial sites.
- Model:
- PSLB305A
- Upper material:
- Leather
Electrical and instrumentationFGR-EIC-004
Oil-immersed distribution transformer 500 kVA, 11/0.4 kV
A three-phase, oil-filled transformer that steps medium-voltage supply down to 400 V for distribution to a site.
- Rated capacity:
- 500 kVA
- Voltage (HV / LV):
- 11 kV / 0.4 kV
Electrical and instrumentationFGR-EIC-007
80 GHz radar level transmitter
A non-contact level instrument that measures the distance to a liquid or solid surface using frequency-modulated radar and outputs a level signal.
- Frequency:
- 76-81 GHz (FMCW)
- Measuring range:
- Up to 120 m
Electrical and instrumentationFGR-EIC-008
Vortex flow meter for steam and gas
An in-line flow meter that measures the frequency of vortices shed from a bluff body to determine the flow of steam, gas or liquid.
- Model:
- HDF-WJ
- Size:
- DN50-100 (attribute table)
Electrical and instrumentationFGR-EIC-009
Fixed gas detector, 4-20 mA
A permanently mounted gas sensor that continuously monitors for combustible or toxic gas and sends a 4-20 mA signal to a controller or PLC.
- Model:
- MT003
- Detectable gases:
- Combustible gas, CO, H2S, O2
Electrical and instrumentationFGR-EIC-010
Head-mounted temperature transmitter, 4-20 mA/HART
A compact transmitter fitted in a sensor connection head that converts an RTD or thermocouple signal into a 4-20 mA output with HART communication.
- Output signal:
- 4~20mA/HART protocol
- Accuracy:
- ≤0.5% F.S
Material handling and liftingFGR-MHL-007
Wire rope electric hoist, 5 t
A motor-driven hoist that winds a steel wire rope on a drum to lift loads, usually running on a trolley along an I-beam or crane girder.
- Model:
- CD1 (single speed)
- Rated capacity:
- 5 t
Material handling and liftingFGR-MHL-010
U-trough screw conveyor
A rotating helical screw inside a covered U-shaped trough that moves powders, granules and small bulk solids along horizontal or inclined runs.
- Model series:
- LS
- Screw diameter:
- 200/250/315/400/500/630/800/1000 mm
Motors, power and airFGR-MPA-007
Motor soft starter 185 kW
An electronic starter that ramps the voltage to a three-phase induction motor to limit inrush current and mechanical shock during starting and stopping.
- Rated power:
- 185 kW
- Voltage:
- 220V/380V/660V...
Motors, power and airFGR-MPA-008
Permanent-magnet synchronous motor 11 kW
A three-phase AC motor with permanent magnets in the rotor, run from a variable frequency drive for high efficiency across a wide speed range.
- Rated output power:
- 11 kW
- Rated speed:
- 3000 r/min
Motors, power and airFGR-MPA-009
Flameproof (Ex d) induction motor 15 kW
A three-phase squirrel-cage motor in a flameproof enclosure for use where flammable gas or vapour may be present.
- Model:
- YBX3-160L-4
- Explosion protection (from listing title):
- Exdb II CT4
Motors, power and airFGR-MPA-010
Natural gas generator set 100 kW
A spark-ignited gas engine coupled to a three-phase alternator, producing electricity from pipeline natural gas.
- Rated power:
- 100 kW / 137.5 kVA
- Rated voltage:
- 230/400 V
Motors, power and airFGR-MPA-013
Diesel mobile light tower 4 x 1000 W
A trailer-mounted lighting tower with a telescopic mast, floodlights and an on-board diesel generator for lighting work areas at night.
- Lights:
- 4 x 1000W metal halide floodlights
- Light capacity:
- 4 x 110000 lumen (total)
Pumps, valves and hydraulicsFGR-PVH-007
Air-operated double-diaphragm pump, 2 inch
A compressed-air driven positive displacement pump that moves liquids, slurries and viscous or shear-sensitive fluids with two reciprocating diaphragms.
- Model:
- RD 50
- Fluid inlet and outlet size:
- 2 in.
Pumps, valves and hydraulicsFGR-PVH-008
Progressive cavity (single screw) pump
A positive displacement pump in which a helical rotor turning inside an elastomer stator moves sealed cavities of liquid from suction to discharge with low pulsation.
- Capacity range:
- 1-166 m3/h
- Pressure (single-stage models):
- 0.6 MPa (60 m head)
Pumps, valves and hydraulicsFGR-PVH-011
Double-acting tie-rod hydraulic cylinder
A linear actuator in which hydraulic oil pressure drives a piston and rod in both directions, with end caps held together by external tie rods.
- Model:
- SLG63/28-300-MF1
- Mounting:
- Front flange
Pumps, valves and hydraulicsFGR-PVH-012
Cast steel swing check valve
A non-return valve whose hinged disc swings open with forward flow and closes against its seat to stop reverse flow.
- Type:
- Swing check, bolted cover, metal seat
- Size range:
- 2 in. to 36 in.
Tanks and pressure vesselsFGR-TPV-012
Hong Hui cryogenic liquid storage tank, 1 to 100,000 m³
A vacuum-insulated bulk tank for storing liquefied industrial gases on site, in vertical or horizontal form, from Hong Hui Machinery.
- Capacity range:
- 1 m³ to 100,000 m³ (on enquiry)
- Configuration:
- Vertical or horizontal
Have a specification? Send it.
Datasheets, drawings, nameplate photos or a list of part numbers are all useful. Attach them to a quote request, or send them to us on WhatsApp.