Tanks and pressure vesselsFGR-TPV-002
Compressed air receiver, 1,000 L
A vertical carbon steel pressure vessel that stores compressed air between the compressor and the distribution network.
- Volume:
- 1,000 L
- Working pressure:
- 0.8 MPa (8 bar)
117 products across 10 categories
Industrial equipment catalogue
Industrial equipment from our OEM and manufacturer network, quoted against your specification. Each product shows its specification and manufacturer reference, confirmed with the OEM before you commit. Need something not listed? Ask us for it.
39 items for Construction and infrastructure
- Tanks and pressure vessels
Pumps, valves and hydraulicsFGR-PVH-002
Horizontal centrifugal slurry pump
A heavy-duty, cantilevered horizontal centrifugal pump with replaceable wear-resistant liners for pumping abrasive mineral slurries.
- Flow (AM series range):
- 13-5000 m³/h
- Head (AM series range):
- 5-68 m
Pumps, valves and hydraulicsFGR-PVH-004
Hydraulic power unit
A packaged hydraulic supply consisting of an electric motor, pump, oil tank and control valves that delivers pressurised oil to cylinders and hydraulic motors.
- Voltage:
- 380V
- Motor power:
- 2.2 kW
Material handling and liftingFGR-MHL-001
Electric chain hoist, 2 t
A motor-driven hoist that lifts loads with a load chain and hook, typically suspended from a hook, trolley or crane beam.
- Rated capacity:
- 2 t
- Lifting speed:
- 2~8 m/min (6.6 m/min also listed)
Material handling and liftingFGR-MHL-002
Troughed belt conveyor
A continuous rubber-belt conveyor carried on troughing idlers that transports bulk materials such as coal, ore, stone and grain.
- Belt width options:
- 500, 650, 800, 1000, 1200, 1400 mm
- Length options:
- 15, 30, 45, 60, 100, 150, 200, 300 m
Material handling and liftingFGR-MHL-003
Diesel counterbalance forklift, 3 t
A four-wheel, diesel-engined counterbalanced lift truck with a rated capacity of 3000 kg at a 500 mm load centre.
- Rated capacity:
- 3000 kg
- Load centre:
- 500 mm
Material handling and liftingFGR-MHL-004
Single-girder overhead crane
An electric overhead travelling crane with a single main girder spanning the bay, running on end carriages along rails and fitted with an electric hoist.
- Capacity range:
- 1, 2, 3, 5, 10, 16, 20 t
- Span:
- 7.5-31.5 m
Process and manufacturing machineryFGR-MFG-004
Electronic universal testing machine
A computer-controlled load frame that applies tensile, compressive or bending forces to test specimens and records force against displacement.
- Max. testing force:
- 100 kN (series: 10/20/30/50/100 kN)
- Measuring range of testing force:
- 2%-100% FS
Motors, power and airFGR-MPA-003
Silent diesel generator set
A diesel engine coupled to an alternator on a common base, housed in a sound-attenuated canopy, for prime or standby electrical power.
- Prime power:
- 200 kVA / 160 kW
- Standby power:
- 220 kVA / 176 kW
Motors, power and airFGR-MPA-004
Rotary screw air compressor
An electrically driven, oil-lubricated compressor that produces continuous compressed air using a pair of meshing helical rotors.
- Motor power:
- 37 kW (50 HP)
- Working pressure:
- 8 bar
Tools, hardware and PPEFGR-TPE-001
Corded angle grinder, 230 mm
A corded 230 mm angle grinder for heavy cutting and grinding of metal and masonry. The reference model is rated at 2,200 W.
- Model:
- GA9020
- Continuous input power:
- 2200 W
Tools, hardware and PPEFGR-TPE-002
Magnetic core drilling machine
1500 W magnetic-base drilling machine for annular cutters up to 60 mm diameter and 75 mm depth, with MT3 tool holder.
- Model:
- DX-60
- Input power:
- 1500 W
Tools, hardware and PPEFGR-TPE-003
Industrial safety helmet
An industrial safety helmet with a polyethylene shell and adjustable harness for head protection on sites and in plants. The reference model is stated by its manufacturer to meet EN 397 and EN 50365.
- Product code:
- AJE030-000-100
- Shell material:
- HDPE
HVAC and refrigerationFGR-HVR-011
Flake ice machine, 20 t/day
An industrial ice maker that freezes water on a refrigerated drum and scrapes it off as thin, irregular flakes for chilling fish, meat and process mixes.
- Daily capacity:
- 20 t/24 h
- Refrigeration capacity:
- 131.4 kW
Process and manufacturing machineryFGR-MFG-005
Double planetary mixer with high-speed disperser
A vertical batch mixer in which two stirring blades rotate on their own axes while orbiting the vessel, combined with a high-speed disperser for viscous pastes.
- Model:
- 30L
- Tank working volume:
- 30 L
Process and manufacturing machineryFGR-MFG-008
Horizontal ball mill 900 × 3000
A rotating steel cylinder partly filled with grinding balls that reduces crushed ore or minerals to fine powder or slurry.
- Model:
- 900 × 3000
- Cylinder rotating speed:
- 36 r/min
Process and manufacturing machineryFGR-MFG-009
Jaw crusher PE250 × 400
A primary crusher that breaks rock and ore between a fixed jaw and a moving jaw driven by an eccentric shaft.
- Model:
- PE250 × 400
- Feed opening:
- 250 × 400 mm
Tanks and pressure vesselsFGR-TPV-004
Double-wall fuel storage tank, 1 to 100,000 m³
A horizontal double-wall fuel tank with a steel inner shell and fibreglass outer wall, used to store diesel and petrol with secondary containment.
- Capacity range:
- 1 m³ to 100,000 m³ (on enquiry)
- Capacity:
- 50000 liters
Tanks and pressure vesselsFGR-TPV-009
GRP sectional panel water storage tank, 1 to 100,000 m³
A rectangular water tank assembled on site from bolted glass-reinforced plastic (SMC) panels, sized from 1 m³ to 1000 m³.
- Capacity range:
- 1 m³ to 100,000 m³ (on enquiry)
- Standard model range:
- 1 m³ to 1000 m³
Tools, hardware and PPEFGR-TPE-004
Inverter MIG/MMA welding machine 350 A
An IGBT inverter welding power source for gas-shielded wire (MIG/MAG) and manual metal arc (stick) welding of steel.
- Input power source:
- 220V ±10% 50/60Hz
- Phase:
- Single phase
Tools, hardware and PPEFGR-TPE-005
Inverter air plasma cutter 60 A
A three-phase DC inverter plasma cutting machine that uses compressed air to cut steel, stainless steel and non-ferrous metals.
- Input voltage:
- AC380V (±15%), three-phase, 50/60Hz
- Rated input power:
- 7.9 kVA
Tools, hardware and PPEFGR-TPE-006
Cordless brushless impact wrench 1/2"
A battery-powered impact wrench with a brushless motor and 1/2-inch square drive for fastening and loosening nuts and bolts.
- Maximum torque:
- 900 N.m
- Battery voltage:
- 18V
Tools, hardware and PPEFGR-TPE-007
SDS-plus rotary hammer drill 26 mm, 800 W
A corded electro-pneumatic rotary hammer with SDS-plus chuck for drilling and light chiselling in concrete and masonry.
- Model:
- Light Rotary Hammer -2657
- Voltage:
- 220-240V
Tools, hardware and PPEFGR-TPE-009
Full-body safety harness (fall arrest)
A polyester-webbing full-body harness with back and waist D-rings for fall arrest at height.
- Material:
- Polyester
- Webbing:
- 45mm polyester webbing
Tools, hardware and PPEFGR-TPE-010
Auto-darkening welding helmet
A welding helmet with an electronic filter that darkens automatically when an arc is struck, protecting the eyes and face during welding and cutting.
- Filter size:
- 110 × 90 × 9 mm
- Viewing area:
- 92 × 42 mm
Tools, hardware and PPEFGR-TPE-011
Steel-toe leather safety boots (S3)
Leather safety boots with a steel toe cap and steel midsole plate for impact, compression and puncture protection on industrial sites.
- Model:
- PSLB305A
- Upper material:
- Leather
Electrical and instrumentationFGR-EIC-004
Oil-immersed distribution transformer 500 kVA, 11/0.4 kV
A three-phase, oil-filled transformer that steps medium-voltage supply down to 400 V for distribution to a site.
- Rated capacity:
- 500 kVA
- Voltage (HV / LV):
- 11 kV / 0.4 kV
Electrical and instrumentationFGR-EIC-005
Cast-resin dry-type transformer 1000 kVA, 10/0.4 kV
A three-phase distribution transformer with epoxy-resin-cast windings and no insulating oil, suited to indoor installation close to the load.
- Series:
- SC(B)10, 10 kV grade
- Rated capacity:
- 1000 kVA
Electrical and instrumentationFGR-EIC-006
Automatic transfer switch 630 A, 4-pole
A switching device that automatically moves a load between mains supply and a standby generator when the normal supply fails or returns.
- Rated current:
- 630A
- Poles:
- 4
Material handling and liftingFGR-MHL-007
Wire rope electric hoist, 5 t
A motor-driven hoist that winds a steel wire rope on a drum to lift loads, usually running on a trolley along an I-beam or crane girder.
- Model:
- CD1 (single speed)
- Rated capacity:
- 5 t
Material handling and liftingFGR-MHL-008
Pillar-mounted slewing jib crane, 5 t
A free-standing column with a rotating horizontal arm carrying a hoist, giving lifting coverage over a circular work area.
- Model:
- BZ5t-5m
- Rated capacity:
- 5000 kg
Material handling and liftingFGR-MHL-010
U-trough screw conveyor
A rotating helical screw inside a covered U-shaped trough that moves powders, granules and small bulk solids along horizontal or inclined runs.
- Model series:
- LS
- Screw diameter:
- 200/250/315/400/500/630/800/1000 mm
Material handling and liftingFGR-MHL-011
Belt bucket elevator
A vertical conveyor in which buckets fixed to a continuous belt scoop bulk material at the boot and discharge it at the head.
- Model:
- TD250 (belt type)
- Bucket width:
- 250 mm
Motors, power and airFGR-MPA-012
Three-lobe Roots blower 150 mm
A positive-displacement rotary lobe blower that delivers a near-constant volume of oil-free air at low pressure.
- Model / bore:
- TRI-LOBE 150H; 150 mm
- Air flow:
- 12~18.35 m³/min
Motors, power and airFGR-MPA-013
Diesel mobile light tower 4 x 1000 W
A trailer-mounted lighting tower with a telescopic mast, floodlights and an on-board diesel generator for lighting work areas at night.
- Lights:
- 4 x 1000W metal halide floodlights
- Light capacity:
- 4 x 110000 lumen (total)
Pumps, valves and hydraulicsFGR-PVH-005
Submersible borehole pump, 4 inch
A multistage centrifugal pump and sealed motor that sit down a drilled borehole to lift groundwater to the surface.
- Model:
- 4SDM2/24
- Motor power (from listing title):
- 1.75 HP
Pumps, valves and hydraulicsFGR-PVH-006
Vertical multistage centrifugal pump
An in-line vertical pump with several impeller stages stacked on one shaft, used to raise clean water to high pressure in a compact footprint.
- Flow capacity range:
- 0-110 m3/h
- Head/pressure range:
- 0-305 m
Pumps, valves and hydraulicsFGR-PVH-009
Submersible non-clog sewage pump
A close-coupled pump and sealed motor that sits submerged in a sump or wet well to pump sewage, drainage and dirty water containing solids and fibres.
- Model series:
- WQ
- Capacity range (series):
- 2-1500 m3/h
Pumps, valves and hydraulicsFGR-PVH-010
Rubber-seated butterfly valve, PN10/16
A quarter-turn valve with a disc rotating on a central stem inside a rubber-lined body, used to isolate or throttle water and general process lines.
- Model:
- D71X-16C
- Size range:
- DN40-DN3000
Have a specification? Send it.
Datasheets, drawings, nameplate photos or a list of part numbers are all useful. Attach them to a quote request, or send them to us on WhatsApp.